The Global Ecosystem Dynamics Investigation (GEDI) instrument aims to characterize ecosystem structure and dynamics to enable radically improved quantification and understanding of the Earth’s carbon cycle and biodiversity. The GEDI instrument produces high-resolution laser ranging observations of the 3-dimensional structure of the Earth. GEDI was launched on December 5, 2018, and is attached to the International Space Station (ISS). GEDI collects data globally between 51.6° N and 51.6° S latitudes at the highest resolution and densest sampling of any light detection and ranging (lidar) instrument in orbit to date. The GEDI instrument consists of 3 lasers producing a total of 8 beam ground transects, which consist of ~30 meter (m) footprint samples spaced approximately every 60 m along-track. The GEDI beam transects are spaced approximately 600 m apart on the Earth’s surface in the cross-track direction, for an across-track width of ~4.2 kilometers (km). GEDI measurements of forest canopy height, canopy vertical structure, and surface elevation can greatly advance our ability to characterize carbon and water cycling processes, biodiversity, and habitat. GEDI data can also be of immense value for weather forecasting, forest management, snow and glacier monitoring, and the generation of digital elevation models.
GEDI filenames (i.e., the local granule ID) follow a naming convention which gives useful information regarding the specific product.
In this example of a Version 2 Level 01B product, the filename GEDI01_B_2019110110221_O01997_03_T03335_02_005_01_V002.h5 indicates:
In this example of a Version 2 Level 01A product, the filename GEDI02_A_2019110014613_O01991_01_T04905_02_003_01_V002.h5 indicates:
In this example of a Version 2 Level 02B product, the filename GEDI02_B_2019110045136_O01993_01_T02061_02_003_01_V002.h5 indicates:
GEDI Product Long Name
The GEDI Product Long Name (i.e., Collection-Level) convention provides useful information regarding all GEDI products.
Below is an example of a GEDI Level 1B product. All GEDI Product Long Names for Version 2 follow the same basic structure.
The GEDI L1B Geolocated Waveform Data Global Footprint Level V002 collection has the following characteristics:
All GEDI products distributed by the LP DAAC are produced at nominally daily temporal resolution. The true revisit period for a given location is variable based on the instrument’s orbital cycle aboard the ISS.
The sole GEDI observable is the waveform from which all other data products are derived. Each waveform is captured with a nominal ~30 m diameter.
The location of the ranging point (also referred to in this document as a bounce point) can be commonly described in terms of geodetic latitude, longitude, and height above a reference ellipsoid, or it can be represented in Cartesian coordinates in an Earth Centered Inertial (ECI) or Earth Centered Fixed (ECF) reference frame.
Several reference frames are used in the precise positioning and precise pointing required for geolocation of GEDI footprints. The Space Station Analysis Coordinate System (SSACS) and GEDI frame are used to orient instruments relative to one another. The Optical Bench Frame (OBF) provides a connection to the GEDI frame and a reference system for targeting calculations. Star tracker frames connect these to the ECI frame allowing conversion to geodetic coordinates.
LP DAAC distributes GEDI land data processed to Level-1 and Level-2:
GEDI science data products include footprint and gridded data products that describe the 3-dimensional features of the Earth. These data products are assigned different levels, which indicate the amount of processing that the data has undergone after collection. All products are publicly available, with the lower level products (L1 & L2) from NASA’s Land Processes Distributed Active Archive Center (LP DAAC) and the higher level (L3 & L4) products from the Oak Ridge National Laboratory DAAC. Data are initially transferred to the GEDI Mission Operations Center (MOC) at the Goddard Space Flight Center, which deploys weekly acquisition planning, and then processed through the Science Operations Center (SOC) to distribute science data products to the above DAACs.
The physical theories, mathematical procedures, and model assumptions that are used in the creation of these data products are described in the Algorithm Theoretical Basis Documents (ATBDs).
GEDI products have two sources of metadata: the embedded HDF5 metadata and the external ECS metadata. The HDF5 metadata contains valuable information, including global attributes and dataset specific attributes pertaining to the granule. The ECS (generated by the EOSDIS Core System) .met file is the external metadata file in XML format, which is delivered to the user along with the GEDI product. It provides a subset of the HDF metadata.
The dataset attributes contain specific SDS information, such as the data range and applicable scaling factors for the data. The LP DAAC data products page provides these details within a concise document for each of the products. An HDF5 file also contains core metadata essential for search services. It should be noted that it is difficult for a standard HDF call to interpret HDF5 geolocation or temporal information without further knowledge of the file structure.
Data access options such as Data Pool and Earthdata Search Client can be found under Tools.
An HDF5 file contains information essential for NASA data access tools and services. Unlike less complex formats, users cannot read the HDF5 files directly without using the HDF5 software library.
Open Source Tools