Calibration Algorithm Theoretical Basis Document (ATBD)
Geolocation Algorithm Theoretical Basis Document (ATBD)
Product Specification Document (PSD)
Radiance Algorithm Specification Document (ASD)
Geolocation Algorithm Specification Document (ASD)
The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data over the conterminous United States (CONUS) as well as key biomes and agricultural zones around the world and selected FLUXNET validation sites. A map of the acquisition coverage can be found on the ECOSTRESS website.
The ECO1BGEO Version 1 data product provides the geolocation information for the radiance values retrieved in the ECO1BRAD Version 1 data product. The ECO1BGEO data product should be used to georeference the ECO1BRAD, ECO2CLD, ECO2LSTE, ECO3ANCQA, ECO3ETPTJPL, ECO4ESIPTJPL, and ECO4WUE data products. The geolocation processing corrects the ISS-reported ephemeris and attitude data by image matching with a global ortho-base derived from Landsat data, and then assigns latitude and longitude values to each of the Level 1 radiance pixels. When image matching is successful, the data are geolocated to better than 50 meter (m) accuracy. The ECO1BGEO data product is provided as swath data.
The ECO1BGEO data product contains data layers for latitude and longitude values, solar and view geometry information, surface height, and the fraction of pixel on land versus water.
|File Size||~1.2 GB|
|Temporal Extent||2018-07-09 to Present|
|Spatial Extent||CONUS, key biomes/agricultural zones, selected FLUXNET sites|
|Coordinate System||None (Swath)|
|Geographic Dimensions||400 km x 400 km|
|Number of Science Dataset (SDS) Layers||9|
|Columns/Rows||5400 x 5632|
|Pixel Size||70 m|
|SDS Name||Description||Units||Data Type||Fill Value||No Data Value||Valid Range||Scale Factor|
|height||Surface Height||Meters||32-bit floating point||N/A||N/A||N/A||N/A|
|land_fraction||Percentage of pixel that is land||Percent||32-bit floating point||-9999||N/A||0 to 100||N/A|
|latitude||Latitude||Degree||64-bit floating point||N/A||N/A||-90 to 90||N/A|
|line_start_time_j2000||J2000 time of first pixel in line||Seconds||64-bit floating point||N/A||N/A||N/A||N/A|
|longitude||Longitude||Degree||64-bit floating point||N/A||N/A||-180 to 180||N/A|
|solar_azimuth||Solar azimuth angle||Degree||32-bit floating point||N/A||N/A||-180 to 180||N/A|
|solar_zenith||Solar zenith angle||Degree||32-bit floating point||N/A||N/A||-90 to 90||N/A|
|view_azimuth||View azimuth angle||Degree||32-bit floating point||N/A||N/A||-180 to 180||N/A|
|view_zenith||View zenith angle||Degree||32-bit floating point||N/A||N/A||-90 to 90||N/A|
Quality information is provided in section 4 of the User Guide.
Geolocation accuracy: In cases where scenes were not successfully matched with the ortho-base, the geolocation error is significantly larger, with the worst-case geolocation error for uncorrected data being at 7 kilometer (km). Within the metadata of the ECO1BGEO file, if the field "L1GEOMetadata/OrbitCorrectionPerformed" is "True," the data was corrected, and geolocation accuracy should be better than 50 m. If this is "False," then the data was processed without correcting the geolocation and will have up to 7 km geolocation error.
Data acquisition gap: ECOSTRESS was launched on June 29, 2018 and moved to autonomous science operations on August 20, 2018 following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4 and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity).
Data acquisition gap: From February 8 to February 16, 2020 an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020 due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected.